Sono dietro a fare un assistenza ad un pc nuovo e non riesco a venirne a capo.
Configurazione
Intel core2 duo 6300
2*512 ram ddr2
Asus p5b
x1650pro
segate 250gb sata2
Dopo alcuni giorni di funzionamento perfetto, ad un avvio il pc non bootava più, presentando solo la schermata di avvio in mod provvisoria e cmq andava in loop continuo.
Ho subito provato con la diagnostica di segate e non mi passava i test.
Formattazione completa e via di reinstallo.
Per precauzione ho fatto uno scandisk approfondito di tutte e 3 le partizioni.
purtroppo dopo l'istallazione presenta dei riavvii random. Ho provato memtest e tutto funziona perfettamente, allora sono ritornato sulla diagnostica dell'hdd e nuovamente mi fallisce il test sulle partizioni.
ecco il log:
codice HTML:
SeaTools Desktop v3.02.04
Copyright (c) 2005 Kroll Ontrack Inc.
1/11/2007 @ 0:33 AM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 10/26/06
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
250 GB BIOS Drive 0x80
Serial Number = N/A
Int13 Num = 80, PHYS CHS = 0x0x0.
ParmTable CHS, Rsvd = 30401x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 7648 62919
EXTENDED
2 NTFS 7649 28428 170932
EXTENDED
3 NTFS 28429 30400 16221
Diagnostic Results:
90-Second Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
SMART Status Check Result: Not Tested
S.M.A.R.T., (S)elf (M)onitoring (A)nalysis and (R)eporting (T)echnology, a built-in hard disk drive failure prediction method reports an 'Alert' if a problem has occurred. It reports 'Passed' if no problems are found and 'Unsupported' if a hard disk drive does not support S.M.A.R.T.
File Structure Test Result:
Partition 1 (NTFS (62.9 GB) Windows Xp) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (170.9 GB) Salvataggi) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in metadata file records
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 3 (NTFS (16.2 GB) Ghost) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in metadata file records
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================
Preciso che le partizioni sono state eliminate e nuovamente ricreate in fase di format
consigli?
Bacio le mani...........
e i piedi se sono puliti.....