Da un po che non usavo il dac per DSD, ma oggi lo attacco é ho qualche problema con Squeezelite-R2, non rieco a mandare in play dsd nativo 256.
codice:
squeezelite-R2 -?
Squeezelite Copyright 2012-2015 Adrian Smith.
this modified version (v1.8.4 (R2)), Copyright 2015 -2017 Marco Curti.
see https://github.com/marcoc1712/squeezelite-R2
See -t for license terms
Usage: squeezelite-R2 [options]
-s <server>[:<port>] Connect to specified server, otherwise uses autodiscovery to find server
-o <output device> Specify output device, default "default", - = output to stdout
-l List output devices
-x Disable downsampling requests to LMS
-a <b>:<p>:<f>:<m> Specify ALSA params to open output device, b = buffer time in ms or size in bytes, p = period count or size in bytes, f sample format (16|24|24_3|32), m = use mmap (0|1)
-a <f> Specify sample format (16|24|32) of output file when using -o - to output samples to stdout (interleaved little endian only)
-b <stream>:<output> Specify internal Stream and Output buffer sizes in Kbytes
-c <codec1>,<codec2> Restrict codecs to those specified, otherwise load all available codecs; known codecs: flac,pcm,mp3,ogg,aac,dsd (mad,mpg for specific mp3 codec)
-C <timeout> Close output device when idle after timeout seconds, default is to keep it open while player is 'on'
-d <log>=<level> Set logging level, logs: all|slimproto|stream|decode|output, level: info|debug|sdebug
-e <codec1>,<codec2> Explicitly exclude native support of one or more codecs; known codecs: flac,pcm,mp3,ogg,aac,dsd (mad,mpg for specific mp3 codec)
-f <logfile> Write debug to logfile
-m <mac addr> Set mac address, format: ab:cd:ef:12:34:56
-M <modelname> Set the squeezelite player model name sent to the server (default: SqueezeLite-R2)
-n <name> Set the player name
-N <filename> Store player name in filename to allow server defined name changes to be shared between servers (not supported with -n)
-p <priority> Set real time priority of output thread (1-99)
-P <filename> Store the process id (PID) in filename
-r <rates>[:<delay>] Sample rates supported, allows output to be off when squeezelite is started; rates = <maxrate>|<minrate>-<maxrate>|<rate1>,<rate2>,<rate3>; delay = optional delay switching rates in ms
-D [delay][:format] Output device supports DSD, delay = optional delay switching between PCM and DSD in ms
format = dop (default if not specified), u8, u16le, u16be, u32le or u32be.
-L List volume controls for output device
-U <control> Unmute ALSA control and set to full volume (not supported with -V)
-V <control> Use ALSA control for volume adjustment, otherwise use software volume adjustment
-z Daemonize
-t License terms
-? Display this help text
Build options: LINUX ALSA EVENTFD DSD
Questo il debug di squeezelite
codice:
squeezelite-R2 -C 1 -D :u32be -o hw:CARD=J20,DEV=0 -d all=debug
[14:58:25.800257] stream_init:290 init stream
[14:58:25.800349] stream_init:291 streambuf size: 2097152
[14:58:25.801489] output_init_alsa:889 init output
[14:58:25.801520] output_init_alsa:930 device : hw:CARD=J20,DEV=0 requested alsa_buffer: 40 alsa_period: 4 format: any mmap: 1
[14:58:25.801541] output_init_common:346 outputbuf size: 3528000
[14:58:25.801596] output_init_common:370 idle timeout: 1000
[14:58:25.802553] output_init_common:410 supported rates: 384000 352800 192000 176400 96000 88200 48000 44100
[14:58:25.806048] output_init_alsa:946 memory locked
[14:58:25.806250] output_init_alsa:969 set output sched fifo rt: 45
[14:58:25.806268] decode_init:129 init decode, include codecs: exclude codecs:
[14:58:25.806331] register_dsd:906 using dsd to decode dsf,dff
[14:58:25.806599] load_faad:610 loaded libfaad.so.2
[14:58:25.806611] register_faad:640 using faad to decode aac
[14:58:25.806916] load_vorbis:300 loaded libvorbisfile.so.3
[14:58:25.806928] register_vorbis:329 using vorbis to decode ogg
[14:58:25.807165] load_flac:266 loaded libFLAC.so.8
[14:58:25.807177] register_flac:294 using flac to decode flc
[14:58:25.807189] register_pcm:424 using pcm to decode aif,pcm
[14:58:25.807343] load_mad:383 loaded libmad.so.0
[14:58:25.807355] register_mad:412 using mad to decode mp3
[14:58:25.807504] discover_server:756 sending discovery
[14:58:25.807741] discover_server:767 got response from: 192.168.178.22:3483
[14:58:25.807772] slimproto:849 connecting to 192.168.178.22:3483
[14:58:25.807911] slimproto:882 connected
[14:58:25.807925] sendHELO:124 mac: 50:e5:49:cc:b4:29
[14:58:25.807937] sendHELO:126 cap: Model=squeezelite,AccuratePlayPoints=1,HasDigitalOut=1,HasPolarityInversion=1,Firmware=v1.8.4 (R2),ModelName=SqueezeLite-R2,MaxSampleRate=384000,dsf,dff,aac,ogg,flc,aif,pcm,mp3
[14:58:25.808544] process:494 strm
[14:58:25.808555] process_strm:256 strm command q
[14:58:25.808566] decode_flush:190 decode flush
[14:58:25.808578] output_flush:423 flush output buffer
[14:58:25.808590] sendSTAT:171 STAT: STMf
[14:58:25.808651] process:494 setd
[14:58:25.808761] process:494 setd
[14:58:25.808779] process:494 aude
[14:58:25.808790] process_aude:395 enable spdif: 1 dac: 1
[14:58:25.808854] process:494 audg
[14:58:25.808864] process_audg:413 audg gainL: 65536 gainR: 65536 adjust: 0
[14:58:25.808875] set_volume:251 setting internal gain left: 65536 right: 65536
[14:58:28.548373] process:494 strm
[14:58:28.548390] process_strm:256 strm command t
[14:58:28.548402] sendSTAT:171 STAT: STMt
[14:58:32.548398] process:494 strm
[14:58:32.548413] process_strm:256 strm command t
[14:58:32.548425] sendSTAT:171 STAT: STMt
[14:58:36.551789] process:494 strm
[14:58:36.551803] process_strm:256 strm command t
[14:58:36.551814] sendSTAT:171 STAT: STMt
[14:58:41.550835] process:494 strm
[14:58:41.550849] process_strm:256 strm command t
[14:58:41.550860] sendSTAT:171 STAT: STMt
[14:58:46.548144] process:494 strm
[14:58:46.548157] process_strm:256 strm command t
[14:58:46.548199] sendSTAT:171 STAT: STMt
[14:58:49.474995] process:494 strm
[14:58:49.475008] process_strm:256 strm command q
[14:58:49.475018] decode_flush:190 decode flush
[14:58:49.475029] output_flush:423 flush output buffer
[14:58:49.475058] sendSTAT:171 STAT: STMf
[14:58:49.487566] process:494 audg
[14:58:49.487576] process_audg:413 audg gainL: 65536 gainR: 65536 adjust: 0
[14:58:49.487587] set_volume:251 setting internal gain left: 65536 right: 65536
[14:58:49.487938] process:494 strm
[14:58:49.487948] process_strm:256 strm command s
[14:58:49.487958] process_strm:325 strm s autostart: 1 transition period: 10 transition type: 0 codec: d
[14:58:49.487971] sendSTAT:171 STAT: STMf
[14:58:49.487990] codec_open:218 codec open: 'd'
[14:58:49.488014] stream_sock:384 connecting to 192.168.178.22:9000
[14:58:49.488151] stream_sock:413 header: GET /stream.mp3?player=50:e5:49:cc:b4:29 HTTP/1.0
[14:58:49.488165] sendSTAT:171 STAT: STMc
[14:58:49.488178] process_strm:357 set fade mode: 0
[14:58:49.488202] process:494 audg
[14:58:49.488216] process_audg:413 audg gainL: 65536 gainR: 65536 adjust: 0
[14:58:49.488227] set_volume:251 setting internal gain left: 65536 right: 65536
[14:58:49.516108] stream_thread:176 headers: len: 115
HTTP/1.1 200 OK
Server: Logitech Media Server (7.9.1 - 1511211491)
Connection: close
Content-Type: audio/dsf
[14:58:49.516641] sendRESP:202 RESP
[14:58:50.007157] output_thread:697 open output device: hw:CARD=J20,DEV=0
[14:58:50.007553] alsa_open:367 opening device at: 44100
[14:58:50.007725] alsa_open:440 opened device hw:CARD=J20,DEV=0 using format: S32_LE sample rate: 44100 mmap: 1
[14:58:50.007754] alsa_open:531 buffer: 40 period: 4 -> buffer size: 1764 period size: 441
[14:58:50.038047] _read_header:191 id: DSD len: 28 consume: 28
[14:58:50.038168] _read_header:158 DSF version: 1 format: 0
[14:58:50.038181] _read_header:168 channels: 2
[14:58:50.038194] _read_header:169 sample rate: 11289600
[14:58:50.038204] _read_header:170 lsb first: 1
[14:58:50.038214] _read_header:171 sample bytes: 2305843009213693951
[14:58:50.038225] _read_header:172 block size: 4096
[14:58:50.038235] _read_header:191 id: fmt len: 52 consume: 52
[14:58:50.038247] _read_header:178 found dsd len: 12
[14:58:50.038257] dsd_decode:765 setting track_start
[14:58:50.038269] dsd_decode:819 DSD256 stream, format: DSD_U32_BE, rate: 352800Hz
[14:58:50.047894] _output_frames:61 start buffer frames: 70656
[14:58:50.047918] _output_frames:146 track start sample rate: 352800 replay_gain: 0
[14:58:50.047934] sendSTAT:171 STAT: STMs
[14:58:50.047963] sendSTAT:171 STAT: STMt
[14:58:50.057937] output_thread:697 open output device: hw:CARD=J20,DEV=0
[14:58:50.062409] alsa_open:367 opening device at: 352800
[14:58:50.062562] alsa_open:440 opened device hw:CARD=J20,DEV=0 using format: DSD_U32_BE sample rate: 352800 mmap: 1
[14:58:50.062583] alsa_open:531 buffer: 40 period: 4 -> buffer size: 14112 period size: 3528
[14:58:50.548697] process:494 strm
[14:58:50.548734] process_strm:256 strm command t
[14:58:50.548745] sendSTAT:171 STAT: STMt
[14:58:51.549787] sendSTAT:171 STAT: STMt
[14:58:52.550904] sendSTAT:171 STAT: STMt
[14:58:53.551970] sendSTAT:171 STAT: STMt
[14:58:54.548166] process:494 strm
[14:58:54.548205] process_strm:256 strm command t
[14:58:54.548216] sendSTAT:171 STAT: STMt
[14:58:55.549257] sendSTAT:171 STAT: STMt
[14:58:56.550378] sendSTAT:171 STAT: STMt
[14:58:57.551451] sendSTAT:171 STAT: STMt
[14:58:58.549019] process:494 strm
[14:58:58.549078] process_strm:256 strm command t
[14:58:58.549090] sendSTAT:171 STAT: STMt
[14:58:59.550130] sendSTAT:171 STAT: STMt
[14:59:00.551252] sendSTAT:171 STAT: STMt
[14:59:01.552324] sendSTAT:171 STAT: STMt
[14:59:02.548313] process:494 strm
[14:59:02.548346] process_strm:256 strm command t
il comando di C-3PO
codice:
Command:
[flac] -dcs --totally-silent $START$ $END$ -- $FILE$ | [sox] -q -t wav - -t dsf -b 1 --buffer 8192 - gain -h rate -v -I -b 90.7 -f 11289600 sdm
Tokenized command:
"/usr/bin/flac" -dcs --totally-silent -- - | "/usr/bin/sox" -q -t wav - -t dsf -b 1 --buffer 8192 - gain -h rate -v -I -b 90.7 -f 11289600 sdm
Niente Audio!
Cosa potrebbe essere?
Con Hqplayer é tutto ok.
Rispondi quotando
