Banchetto Microcool 101 Gaming Edition

[UdoG]

Con il collegamento/raccordi hai usato qui? Potete per favore darmi maggiori dettagli le parte?
With connection did you use here? Can you please give me more details the parts?

[j0h89]

Con il collegamento/raccordi hai usato qui? Potete per favore darmi maggiori dettagli le parte?
With connection did you use here? Can you please give me more details the parts?

Monsoon compression fittings
http://www.nexthardware.com/news/mon...rcooling-4284/

[UdoG]

Monsoon compression fittings
Monsoon Compression Fitting, nuovi e geniali raccordi per il watercooling

Thanks for your feedback. Is there no additional part for the partition (I don't know the english word - maybe in italien = paratia) necessary? How did you connect the tube on the bottom side - I think with the described Monsoon part, but there is nothing between the parts?

Or did you use an additional fill port?

Hopefully you understand what i mean...

Udo

[j0h89]

Thanks for your feedback. Is there no additional part for the partition (I don't know the english word - maybe in italien = paratia) necessary? How did you connect the tube on the bottom side - I think with the described Monsoon part, but there is nothing between the parts?

Or did you use an additional fill port?

Hopefully you understand what i mean...

Udo

He used a female/female pass-through fitting for each tube in order to bypass the black plate and mount Monsoon's fittings on each side.

For the fill-port, on the right, he used the same method but he mounted a fill-port on the top and a Monsoon fitting on the bottom (that is not visible in the photo)

Here you can see better
Microcool_101_Gaming_XSPC_RX360_RAD.JPG

In this case, he used, for each tube on the right, starting from the top to the bottom: Monsoon's fitting, pass-through port, 90° adapter and another Monsoon's fitting

[UdoG]

@j0h89

Could you please ask giampa if the hanger for the fans is self-made? Because only 92mm will fit in the original hanger of the Banchetto 101.



Original version:

[giampa]

Yes, Microcool had them made for me as the entire benchtable, that is full aluminium.

[UdoG]

Thanks. You asked Microcool in italy? Maybe I will contact them and ask for the same hanger.

[virgolanera]

Thanks. You asked Microcool in italy? Maybe I will contact them and ask for the same hanger.

You can do it HERE.