Formato BTX pronto da ASUS per INTEL [Foto]

[zincoboy]

Le schede madri sono + piccole , dovrebbe essere una pacchia per i modder .......no?

[Ludus]

non mi sembrano tanto piccole

[principino1984]

si e io il mio lianli pc75 dove lo butto? oooo ma siam di fuori! evviva l'ATX!!! altro ke BTX e skede madri ke fan kakare!!! DIAMINE

bellina la firma del giampa... kissà quando l'ha fatta :smt040

[asphalt]

Per tutti quelli che non credono nel futuro del BTX.....
ecco ANTEC....
naturalmente con alimentatori specifici...
***************************************************************
Antec's upcoming micro-BTX minitower, the Solution Series BK640 is shown below. This steel case is still in preproduction stage, and the LED-lit front intake will be toned down a little. A standard ATX 400W SmartPower 2.0 PSU as well as two rear mounted 92mm TriCool 3-speed fans will be included.
***************************************************************



*************************************************************
Shown below is the junior model of the new Performance TX line, to replace the Performance series. It is the only beige model with a SmartPower 2.0 350 . It utilizes an Intel-spec Chassis Air Guide, thus making it a certified Thermally Advantaged Chassis. There will be three higher models. The TX640B, appears to be the same minitower structure as TX635, but in black, and includes a 400W PSU. The TX1050B, "SOHO File Server" fits Extended ATX boards, and sports a 500W SmartPower 2.0, and additional 5.25" and internal 3.5" bays. TX1088AMG, another "SOHO File Server," comes in Metallic Grey, with a TruePower 2.0 480 and one more 80mm intake up front.
*************************************************************


uno dei nuovi alimentatori....

[asphalt]

ed infine....

Finally, the new flagship ATX tower enclosure, the Performance One P180, covered recently in the SPCR's front page news, was introduced to us as "Antec's case of the century." (Caution: There are 95 years to go still! Perhaps "thus far" should be added...) Utilizing nearly every technology in Antec's book and then some to achieve maximum performance while at the same time achieving new levels of acoustic performance, this case features:

* Separate, exclusive thermal zones for the PSU and the system, both sections fed with their own intakes and exhausts; Antec even sealed the two zones apart at the side panel with some gasket material.
* Aluminum-plastic-aluminum composite, damped panels for the sides, top and front door.
* New, thicker, softer grommets for HDD mounting.
* All-120mm fans for maximum breathing with minimum rotation speeds.
* New three-way adjustable, rear-feeding chassis air guide.
* 0.8mm cold rolled steel for primary structure, 1.0mm cold rolled steel for additional mass dampening of the quad-HDD section.
* Rear and top panel exhaust fans are included, and are 120x25mm thick TriCool 3-speed models. Also included is a 120x38mm TriCool fan midway through the PSU section.
* Front door opens a full 270-degrees to remain out of the way for extended periods of open usage.




Antec cautions that there will be changes to this prototype before their first real production run. Both 120mm intakes up front are filtered, as is the top panel exhaust, and the entire front bezel has been vented with slits on the sides to improve intake breathing. Even the rings used for pulling out the removable 3.5" drive bays have small plastic retentions to keep them from rattling! Finally, Antec chose to mount the spare drive rails within easy reach on the adjustable chassis air guide, which also see some change before final release. No power supply is included, allowing the end user to make their own choice. Antec left sufficient space even to fit the deeper than standard Phantom 500.

[principino1984]

mio dio ke brutti!!! io il mio lian li pc75 nemmeno a morire lo cambio!!!

[asphalt]

Non lo metto in dubbio che siano brutti ma che dire.......vogliono che si cambi anche il formato della mobo

Non mi avranno...piuttosto modifico il mio chieftec ma non gli darò la soddisfazione :

[principino1984]

Non lo metto in dubbio che siano brutti ma che dire.......vogliono che si cambi anche il formato della mobo

Non mi avranno...piuttosto modifico il mio chieftec ma non gli darò la soddisfazione :

nemmeno io!!! ho patito tanto x arrivare a comprarmi sta bestia...ora ke c'ho messo su l'ocz 520 nn lo cambio di certo più!!!