Un saluto a tutti e' da qualche giorno che mi e' arrivata la mobo nuovama causa impegni di lavoro non mi ci sono potutto dedicare come avrei voluto.
Per ora ho provato a vedere quale fosse il Max FSB con il mio E8500 a liquido e questo e' quello che sono riuscito a combinare:
By cische
configuration:
Asus P5Q3 Deluxe
2gig's Kingston HyperX DDR3: kit PC14400
C2D E8500
Lunasio Liquid cooling Cpu
Ai Overclocker Tuner: Manual
CPU Ratio Setting: 06.0
FSB Frequency:550
PCIE Frequency: 100
FSB Strap To North Bridge: 400
DRAM Frequency: DDR3_1460
DRAM CLK Skew on Channel A1: Auto
DRAM CLK Skew on Channel A2: Auto
DRAM CLK Skew on Channel B1: Auto
DRAM CLK Skew on Channel B2: Auto
DRAM Timing Control: Manual
CAS Latency: 7
DRAM RAS to CAS Delay: 7
DRAM RAS Precharge: 7
DRAM RAS Activate to Precharge: 21
RAS TO RAS Delay: Auto
Row Refresh Cycle Time: Auto
Write Recovery Time: Auto
Read To Precharge Time: Auto
DRAM Static Read Control: Disabled
DRAM Dynamic Write Control: Disabled
DRAM Read Training: Auto
DRAM Write Training: Auto
MEM OC Charger: Auto
Ai Clock Twister: Auto
AI Transaction Booster: Manual
Common Performance Level:11
CPU Voltage: 1.350v
CPU GTL Voltage Reference (0/2): Auto
CPU GTL Voltage Reference (1/3): Auto
CPU PLL Voltage: 1.50
FSB Termination Voltage: 1.4
DRAM Voltage: 1.90
NB Voltage: 1.5
NB GTL Voltage: 0,55
SB Voltage: Auto
PCIE SATA Voltage: Auto
Load-Line Calibration: Disabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto
Appena ho un po di tempo voglio vedere come si comporta sotto Cascade![]()